Does OSHA 10 Expire? What Federal, State and Job-Site Rules Say
No, OSHA 10 and OSHA 30 cards do not expire under federal rules. The OSHA Outreach Training Program card issued by the U.S. Department of Labor has no expiration date, and federal OSHA does not require workers to renew or retake the course.
However, some states, cities, employers, unions, and job sites require OSHA 10 or OSHA 30 training to be recent, most often completed within the last 5 years.
In this guide, we cover what OSHA’s federal rules say, which states and cities require retraining and how often, how OSHA 30 compares, and what to do about a lost card. A three-question checklist tells you whether you need to retake the course.
When does an OSHA 10 or OSHA 30 card need to be renewed?
An OSHA 10 or OSHA 30 card needs to be renewed only when a state law, city law, employer policy, union rule, or job-site requirement says so. Federal OSHA never requires renewal. The table below shows the most common situations.
| Your situation | Does your OSHA card expire? | What to do |
|---|---|---|
| Only federal OSHA rules apply | No. The card is valid indefinitely. | Keep the card (or a scan of it) somewhere safe. |
| Your state or city has an OSHA training law | Sometimes. A few laws only accept training from the last 5 years. | Check the state and city table below. |
| Your employer or union has a refresher policy | Yes, under that policy (often every 3–5 years) | Ask HR, your union rep, or the safety manager. |
| A general contractor or project requires recent training | Yes, for that job site | Check the subcontract or site safety plan before you start. |
| You lost or damaged your card | No, but replacements have time limits | Contact the trainer or online provider who ran your course (see below). |
Key point: The real question isn’t how old your OSHA card is – it’s whether the place you work needs proof of recent training.
What does OSHA say about OSHA 10 and OSHA 30 card expiration?
OSHA says its Outreach Training Program cards for Construction, General Industry, Maritime and Disaster Site work have no expiration date. And that genuinely covers both the 10-hour and the 30-hour cards. A worker who finished OSHA 10 Construction ten years ago still holds a valid federal card.
Is OSHA 10 a certification or a license?
No. The OSHA 10 card is a course completion card. It is not a license or a certification. The OSHA Outreach Training Program is voluntary, and OSHA does not require participation in this program.
OSHA describes it as an orientation to occupational safety and health, and workers must also get training on the specific hazards of their own job. So when your card is “required,” the requirement comes from a state, city, employer, or contract, not from federal OSHA.
What changed for Maritime cards in 2019?
Maritime cards used to expire. Maritime student cards expired five years after the training, and students had to take an update course to keep a valid card. OSHA dropped that rule.
As of April 1, 2019, Maritime student course completion cards do not expire, training completed before this date remains valid, and cardholders are not required to obtain a replacement.
Do OSHA trainers have to renew?
Yes, but the rule is for trainers, not workers. Authorized Outreach trainers have to take an update course to keep their authorization. Under OSHA’s Outreach Training Program Requirements, if a trainer’s authorization has expired, the trainer will be unable to conduct Outreach training – this is a common source of the “OSHA 10 expires” myth.
Where does the “5 years” number come from?
The 5-year figure shows up in several OSHA rules, but none of them is a card expiration date:
- Replacement cards – a replacement card can only be issued if the class was taken within the last five years, and only one replacement card may be issued per student per class.
- Trainer records – each authorized OSHA outreach trainer is required to maintain records on their training for a period of five years.
- State, city and employer rules – many of these accept only training completed within the last 5 years (see the state table below).
Key point: Your federal OSHA 10 card never expires; whether a particular job site will accept it is a separate question.
When do you need to renew or retake OSHA 10?
You need to renew or retake OSHA 10 when a state law, city law, employer or union policy, job-site rule, or public contract requires recent training. Federal OSHA never requires a retake, so these local and employer rules are the only reason to take the course again. When a rule does set a limit, it is usually the same test: was your OSHA 10 or OSHA 30 completed within the last 5 years?
State and city laws
About a dozen states and cities require OSHA 10 or OSHA 30 for certain construction or event workers, mostly on public projects. Only a few of them limit how old the training can be:
- New York City: Local Law 196 doesn’t renew the OSHA card itself. It requires a Site Safety Training (SST) card on larger job sites. SST cards are valid for 5 years and are renewed with an 8-hour (worker) or 16-hour (supervisor) SST refresher taken in the 12 months before the card expires. To get your first SST card, your OSHA 10 or OSHA 30 must be from the past 5 years. Once the SST card is issued, the NYC Department of Buildings says you don’t need to refresh the OSHA card again.
- Connecticut: On covered public works projects, an OSHA 10 card dated more than 5 years before the project start date doesn’t count.
- Nevada: Construction workers must get an OSHA 10 card (supervisors: OSHA 30) within 15 days of being hired. Since a 2015 change to the law, Nevada’s construction cards have no expiration date. The 5-year expiration still applies to Nevada’s separate card laws for the entertainment industry and convention services.
The full list of states and cities is in the table below.
Employer and union policies
Many construction employers and unions set their own refresher rule, often every 3 to 5 years, even where no law requires it. This is the most common reason workers are asked to retake OSHA 10. These rules sit in company safety programs, union apprenticeship requirements, and insurance carrier conditions. Your HR department, safety manager, or union representative can tell you what applies to you.
Job-site and general contractor requirements
General contractors and project owners often write OSHA training rules into their site safety plans and subcontracts. A typical clause requires every worker on site to show an OSHA 10 card issued within the last 5 years, and supervisors to show OSHA 30. These rules apply only to that project, so the same card can be accepted on one site and turned away on another. Check the subcontract or ask the site safety manager before you start work.
Government and public-works contracts
Several states require OSHA 10 on publicly funded construction projects above a set contract value. In New York, for example, contractors must attach proof of OSHA 10 completion to the first certified payroll and to each later payroll that lists a new worker. Most of these laws require that the training was completed, not that it is recent, but individual agencies and bid documents can add their own time limits, so read the specifications.
Key point: Before you retake OSHA 10, find out which rule is asking for it: a state, a city, your employer, or the job site. Each one sets its own deadline.
State and city OSHA 10 and OSHA 30 requirements (2026)
This table lists the best-known state and city OSHA 10/30 laws and whether each one sets a renewal period. Checked against the official law or agency page in November 2026. Laws change, so confirm with the contract or agency before you rely on it.
| State / city | Who needs it | Course | Renewal or “recent training” rule |
|---|---|---|---|
| New York City | Construction and demolition workers on sites that need a Construction Superintendent, Site Safety Coordinator or Site Safety Manager (Local Law 196) | SST card (40 hours for workers, which can include OSHA 10 or OSHA 30) | SST card expires after 5 years; renew with an 8-hour (worker) or 16-hour (supervisor) refresher. OSHA 10/30 used for a first SST card must be from the past 5 years. |
| New York State | Workers on public works contracts of $250,000 or more (Labor Law §220-h) | OSHA 10 | No renewal required by the state |
| Connecticut | Workers on covered state and municipal public works projects (Gen. Stat. §31-53b) | OSHA 10 | Card must be dated no more than 5 years before the project start date |
| Nevada (construction) | All construction workers, within 15 days of hire; supervisors need OSHA 30 (NRS 618.983) | OSHA 10 / OSHA 30 | No expiration since 2015 |
| Nevada (entertainment and convention services) | Covered entertainment-industry and convention-services workers (NRS 618.9911, 618.9929) | OSHA 10 / OSHA 30 (General Industry) | Card expires after 5 years; renew with a new course or continuing education |
| Philadelphia | Every worker on a permitted construction or demolition site; licensed contractors need a supervisor with OSHA 30 | OSHA 10 / OSHA 30 | Workers: no renewal for OSHA 10. The supervisor’s OSHA 30 must be from the last 5 years when the contractor license is applied for. |
| Pennsylvania (outside Philadelphia) | No statewide OSHA 10 law | — | Employer and job-site rules only |
| Massachusetts | Workers on public works and public building projects (M.G.L. c.30 §39S) | OSHA 10 (OSHA 30 also counts) | No renewal period in the law |
| Missouri | On-site workers on public works projects, within 60 days of starting (RSMo 292.675) | OSHA 10 | No renewal required |
| New Hampshire | Workers on public works projects of $100,000 or more (RSA 277:5-a) | OSHA 10 | No renewal period in the law |
| Rhode Island | Workers on state and municipal construction projects over $100,000 (R.I. Gen. Laws §37-23) | OSHA 10 | No renewal period in the law |
| West Virginia | Workers on public improvement projects of $50,000 or more, within 21 days (W. Va. Code §21-3-22) | OSHA 10 | No renewal period in the law |
| Miami-Dade County, FL | Construction workers on county construction contracts over $1 million (Residents First program) | OSHA 10 (OSHA 30 accepted) | No renewal period in the program rules |
Not on this list? Your state has no OSHA 10 law, but employer, union, and job-site rules still apply.
Some online summaries say Nevada or Miami-Dade construction workers must renew OSHA 10 every 3–5 years. That doesn’t match the current rules: Nevada removed the renewal for construction cards in 2015, and Miami-Dade’s county contract rules only require that the course was completed before work starts. NYC and Connecticut are the main places where the age of your training matters by law.
Do I need to retake OSHA 10? A 3-question checklist
- Does your state or city require recent training? If you work in New York City (SST card) or on a Connecticut public works project, and your card is older than 5 years, yes. Check the table above.
- Does your employer or union have a refresher policy? If yes, follow it, even if your state has no rule.
- Does your project, general contractor, or bid require a recent card? Check the subcontract, site safety plan, or bid specifications.
If all three answers are no, you don’t need to retake OSHA 10. If your card is more than 5 years old, a refresher is still worth considering, because OSHA rules such as the construction silica standard and the walking-working surfaces rule have changed since 2016.
Does OSHA 30 expire?
No, OSHA 30 cards do not expire under federal rules, for the same reason OSHA 10 cards don’t: the Outreach Training Program card has no expiration date. The same state, city, employer, and job-site rules can apply to OSHA 30, and some of them, such as Philadelphia’s contractor licensing rule, ask for an OSHA 30 completed within the last 5 years for supervisors. Most state OSHA 10 laws also accept an OSHA 30 card in its place.
OSHA 10 vs OSHA 30: which do you need?
| OSHA 10 | OSHA 30 | |
|---|---|---|
| Who it’s for | Entry-level workers | Supervisors, foremen, and workers with safety responsibility |
| Length | 10 hours, over at least 2 days | 30 hours, over at least 4 days |
| Versions | Construction, General Industry (plus Maritime) | Construction, General Industry (plus Maritime) |
| Federal expiration | None | None |
| Meets OSHA 10 laws? | Yes | Usually yes (check the specific law) |
OSHA limits Outreach training to 7.5 hours per day, which is why the courses take at least 2 and 4 days. You can’t combine an OSHA 10 with extra hours to “upgrade” it to OSHA 30; it is a separate course. Pick the version (Construction or General Industry) that matches the work you do.
Lost or damaged OSHA card: how replacement works
- Who to contact: the trainer who ran your class, or your online provider if you trained online. OSHA does not keep records of Outreach classes and can’t issue a card itself.
- Time limit: a replacement can only be issued if the class was taken within the last five years.
- Limit: only one replacement card per student per class.
- New cards: trainers must issue student cards within 90 days of the class ending.
If your class was more than 5 years ago and you’ve lost the card, you will usually need to retake the course to get a new one. Keep a photo or scan of your card so you always have proof.
For employers: how to track crew OSHA cards and retraining dates
When one crew works across NYC, Connecticut public works, and private jobs with their own GC rules, a spreadsheet of card dates gets out of date fast. Each worker can have a different “retrain by” date depending on where they’re assigned.
With ExpirePilot’s training tracking software, you can:
- Store each worker’s OSHA 10, OSHA 30, and SST card with a scan attached, and let AI document scanning read the dates from the card.
- Set a “retrain by” date per worker and get automated expiration reminders by email before it arrives, with escalation to a manager if nobody acts.
- Define required documents by role (for example, OSHA 30 for foremen) and see who is missing what.
- Send workers and subcontractors a document upload link to send in their renewed card.
- Export an audit-ready report when a GC or agency asks for proof of training.
The same account can track other credentials and documents your crews need, such as certifications, permits, and subcontractor certificates of insurance.
Stop tracking OSHA cards in spreadsheets
Store every worker’s OSHA 10, OSHA 30 and SST card in one place and get reminders before retraining is due. Try every Business feature free for 14 days, then stay on the Free plan or pick a paid plan.
✓ No credit card needed ✓ Free plan after the trial ✓ Nothing is deleted
Sources
- OSHA Outreach Training Program FAQ
- OSHA Outreach Training Program (10-Hour and 30-Hour Cards)
- NYC Department of Buildings: SST card information
- New York State DOL: OSHA 10 on public works
- Connecticut Regs. §31-53b-2
- Nevada NRS Chapter 618 and SB 233 (2015)
- City of Philadelphia: Get a contractor license
- Massachusetts Attorney General: OSHA 10 Act advisory
- Missouri DOLIR: Required safety training
- Miami-Dade County: Residents First
The author

Venchito Tampon
Venchito Tampon is the Founder of ExpirePilot, document expiration tracking software that helps small businesses keep licenses, certifications, insurance certificates and contracts from lapsing, with reminders that reach the right people before anything expires.
He is also the CEO and Founder of eLearning Solutions Lab, a Philippines-based eLearning production company specializing in custom eLearning development and rapid eLearning solutions for global clients.
He founded Rainmakers Training & Consultancy, a corporate training and leadership development firm where he has trained and spoken at 250+ conventions, seminars, and workshops across the Philippines and internationally, including Singapore, Slovakia, and Australia. He has worked with top corporations including SM Hypermarket, Shell, and National Bookstore.
His other ventures include SharpRocket, a digital marketing and SEO company, and Hills & Valleys Cafe, a local café with available franchising.
He is a certified member of The Philippine Society for Talent Development (PSTD), the premier organization for Talent Development practitioners in the country, and an active Go Negosyo Mentor under the Mentor Me program.